skip to Main Content

Tech Series Flexible I/O

Has a myriad of I/O options.

Raveon’s new Tech Series radios come of with interchangeable front panels so you can connect to your RV-M21 or RV-M22 RF modems however you want. The interchangeable front panel boards can be swapped out anywhere the M21 or M22 goes without the need to reprogram them for their new connectors.

%CODE1%

Front Panels Available:Changeable front TechSeries

  • RS-232 Interface Port
    • Connector Type…………DB-9 female
    • IO Voltage Levels……….RS-232
  • RS-485 Interface Port
    • Connector Type…………Phoenix 6-pin
    • IO Voltage Levels……….RS-485
  • USB Interface Port
    • Connector Type…………Micro USB
  • Analog Interface Port
    • Connector Type…………DB-15 female
  • GPIO Interface Port
    • Connector Type…………Mini B
  • CLO  Current Loop Output (CLO)
    • Connector Type…………Mini B
  • FIO Flexible IO, 8 digital IO pins and a UART
    • Connector Type…………DB-15 female

The FIO and GPIO Tech Series enclosures can utilize MODBUS SCADA messages to turn on or off the outputs, or read the status of the inputs. The GPIO interface has 3 GPIO pins to do what you want. It can switch DC power, it can read voltages, it can take digital inputs.  The Tech Series M21 M22  FIO panel has 8 digital I/O pins on it, that can be configured to be digital inputs or digital outputs and it has a two digital UART pins.

On the GPIO Tech Series radio, connect Sensors to Monitor.  The GPIO can mimic the sensor, a long ways away, to this modem with Current Loop Output (CLO) to output the 4-20mA signal read by the sensors monitored on the GPIO radio.

Back To Top