Data Radio Accessories

RV-M7-DIN

DIN rail mounting clips. Two clips included. These clips are secured to the the bottom of the M7 series of radio modems. When secured to the the M7, the M7 will clip onto a standard DIN rail.

Picture of DIN clips installed on M7

DB9M-TB

The field termination terminal block is very useful for interfacing the M7 radio modem with the RS-485 and RS-422 devices. Customer ordering the RS422/485 option should also order this field termination block because it makes installation very easy.

PS-60

AC-DC power supply for M7 series of data radios.

Specifications:

RT-CB-H1

DC power cord for M7 series data radio modems. Each M7 radio is shipped with one, RT-CB-H1.

RT-M7-HS

Heatsink Option for M7 series of data radios. With this option, the M7 will operate at up to 100% duty cycle with an ambient temperature of 45C. With air circulating on the heatsink fins, the M7 may be operated at 100% duty cycle up to 50C.

Picture of M7 with heatsink option installed.

RV-SP-x

In-Line DC Surge Protector. The RV-SP-x is designed to be plugged in-line with the DC input
to electrical devices that may be subject to over-voltage (> 16V) events, large transient voltage spikes, electrical noise, or RF
noise. It filters the DC and protects the connected device from
over-voltage and transient events.

M7-USB

USB Option for M7 series of data radios. USB option replaces the standard DB9 RS232 serial connector with a USB 2.0 MINI-B connector and internal a USB-Serial bridge. All features and functions of the M7 remain available via the USB connection.
Picture of M7 with USB option installed.
M7-USB Option Technical Information