RadioManager 5.8.1 is now available for download! If you’ve installed RadioManager before, you already have all the dependencies and you can simply download the executable file and run it. If you are trying it for the first time, download the installer now! New Features 5.8.1 (January 2014) Bit Error Rate Testing Added Bit Error Rate Testing (BERT).  By […]

New Features: An upgrade detection engine has been added to the radio. Upgrades to D70 or later will process upgrade steps automatically, keeping functionality as identical as possible. Operation should always be verified after upgrade. The CONFIG command is now supported as a user-accessible command to retrieve all radio configuration The UJ (military UHF) band […]

New Features: (D61) Added the TRIGEVENT setting which sets whether a trigger causes a latched event. TRIGBITS must be 1 for the GPIO for the event to occur (GX radios only) (D61) A 1 setting in TRIGBITS and a 0 in TRIGEVENT now causes the bit to latch it’s value until transmission, but not to […]

D58 introduces Data Framing, a new flow control option for all M7 series data radios. See the tech blog post for information on how to reduce system power using this new feature. New Features: The M7 radio modem now supports Data Framing using the CD line. The commands ATS120 and ATS121 may be used to set […]

Along with D55 is the initial release of Raveon’s latest upgrade to the ATLAS PL, the ATLAS PT. The ATLAS PT contains all the features of the PL, which in turn contains all the features of the M7-GX. New Features: All M7 family products now contain a bootloader allowing future upgrades without any disassembly The […]

 New features and fixes MIMIC mode has now been added The ATDG command has been removed The sleep modes have been updated. ATSM 2 will turn TX and RX off.  ATSM 4 is for TX only ATR3 is now saved without the save command. Previous version required the save command to save R3 Accelerometer calibration […]

New features and fixes The  “/” key can now be used to repeat the previous command. Added login capability with password protection. If the password is set, login is required. The PASSWORD command will set the password and PASSWORD 0 will disable it. Added an extended speed field to the standard GPS position report. Speeds […]