In the M7 radio, Sleep Mode 1 is enabled with the ATSM 1command. There also must be 3 components installed on the circuit board of the M7 radio to allow sleep mode 1 to work. It is highly recommended that this modification be done at Raveon, or by very qualified technician skilled in fine-pitch soldering. Damage to […]
M7 series products with firmware version C0 or higher have the ability to password protect the user interface. If it is password protected, the radio will output a “password:” prompt when entering the command mode. When in the command mode, to enable the use of a password enter: Password xxxx Where xxxx is the 2-7 […]
Overview Many different types of batteries may be used with Raveon’s M7 series of GPS transponders. This Technical Brief describes how well some common battery types will work with the M7 radios. Actual battery life will vary based upon how often the M7 GPS transponder transmits, but the data in this Technical Brief may be […]
Follow us on Linkedin! 