{"id":645,"date":"2010-09-30T16:11:14","date_gmt":"2010-09-30T16:11:14","guid":{"rendered":"http:\/\/www.raveon.com\/data_radio_info\/?p=645"},"modified":"2012-10-10T16:28:40","modified_gmt":"2012-10-10T16:28:40","slug":"c12-release-notes","status":"publish","type":"post","link":"https:\/\/www.raveon.com\/data_radio_info\/c12-release-notes-645\/","title":{"rendered":"C12 Software Release Note (M7 Series)"},"content":{"rendered":"<p><em>New features and fixes<\/em><\/p>\n<ul>\n<li>The\u00a0 &#8220;\/&#8221; key can now be used to repeat the previous command.<\/li>\n<li>Added login capability with password protection.\n<ul>\n<li>If the password is set, login is required.<\/li>\n<li>The PASSWORD command will set the password and PASSWORD 0 will disable it.<\/li>\n<\/ul>\n<\/li>\n<li>Added an extended speed field to the standard GPS position report. Speeds &gt; 255km\/h are now supported and will add one byte over-the-air<\/li>\n<li>Modified behavior of the REPEAT 1 command.\u00a0 After using it, everything will be repeated, and entries 2-4 in the table are erased<\/li>\n<li>WMX message output now contains an RSSI field<\/li>\n<li>A CRC is now always required over-the-air. This change is transparent to users but increases reliability<\/li>\n<li>TDMA slots now have a 10mS resolution<\/li>\n<li>GPS 5 (-LX) now defaults to $PRAVE instead of WPL<\/li>\n<li>Carrier detect level can now be set with the ATCD command. The default is -113dBm.<\/li>\n<li>The ATRA command has been removed<\/li>\n<li>TRIGBITS now latch- e.g. if set for high, they will always be transmitted high once<\/li>\n<li>If TXRATE=0 and IDLERATE=0, then unit will now not report at all<\/li>\n<li>GGA and RMC position messages can now be selected via OUTPUT 11 and 12 commands.<\/li>\n<li>The default serial rate is now 9600 baud<\/li>\n<li>AT&amp;F saves all commands now. Previously an ATSV command was required<\/li>\n<li>All UTC times ($PRAVE, etc) are now always 6 digits, with leading zeros.<\/li>\n<li>VTG output messages are now turned on in GPS mode 13<\/li>\n<li>VTG and GLL messages can now be turned out with OUTPUT 14<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>New features and fixes The\u00a0 &#8220;\/&#8221; key can now be used to repeat the previous command. Added login capability with password protection. If the password is set, login is required. The PASSWORD command will set the password and PASSWORD 0 will disable it. Added an extended speed field to the standard GPS position report. Speeds [&hellip;]<\/p>\n","protected":false},"author":13,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[49],"tags":[50],"_links":{"self":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/645"}],"collection":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/users\/13"}],"replies":[{"embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/comments?post=645"}],"version-history":[{"count":3,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/645\/revisions"}],"predecessor-version":[{"id":649,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/645\/revisions\/649"}],"wp:attachment":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/media?parent=645"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/categories?post=645"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/tags?post=645"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}