{"id":1292,"date":"2020-01-21T11:19:26","date_gmt":"2020-01-21T19:19:26","guid":{"rendered":"http:\/\/www.raveon.com\/data_radio_info\/?p=1292"},"modified":"2020-01-21T11:19:28","modified_gmt":"2020-01-21T19:19:28","slug":"fast-long-range-radio","status":"publish","type":"post","link":"https:\/\/www.raveon.com\/data_radio_info\/fast-long-range-radio-1292\/","title":{"rendered":"Fast Long Range Radio"},"content":{"rendered":"\n<p>This is information about a communication time test with an oscilloscope to measure and show how fast our long-range LoRa technology works. <\/p>\n\n\n\n<p>Below is a picture of the data communication time.  <\/p>\n\n\n\n<p>The <strong>Green<\/strong> pulses were inbound 16 bytes of data on a UART into Radio #1 at 38400bps. <\/p>\n\n\n\n<p>The <strong>Yellow<\/strong> pulses are the\noutbound 16 bytes of data on a UART in Radio #2 that received the over-the-air\nmessage from #1. <\/p>\n\n\n\n<p>So from the time the first message was sent into the radio it fully came out of the other radio in <strong>40mS.<\/strong>\u00a0 <\/p>\n\n\n\n<p>This is Raveon&#8217;s RV-M50 ISM band transceiver that uses LoRa technology. <\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" width=\"468\" height=\"347\" src=\"https:\/\/www.raveon.com\/data_radio_info\/wp-content\/uploads\/2020\/01\/LoRa7.jpg\" alt=\"\" class=\"wp-image-1293\" srcset=\"https:\/\/www.raveon.com\/data_radio_info\/wp-content\/uploads\/2020\/01\/LoRa7.jpg 468w, https:\/\/www.raveon.com\/data_radio_info\/wp-content\/uploads\/2020\/01\/LoRa7-300x222.jpg 300w\" sizes=\"(max-width: 468px) 100vw, 468px\" \/><\/figure>\n\n\n\n<p>This message passed along over the M50 radio modes was doen with them in the spreading factor of 7.  With LoRa technology, there are many spreading factor options to utilize.  Following is a list of over-the-air data rates for LoRa data radio modems. <\/p>\n\n\n\n<p>In Raveon Radios, Channel data rate varies by spreading factor, spreading factor can be set with <strong>ATSF &lt;val><\/strong>, where <strong>&lt;val> <\/strong>is set according to the table below:\u00a0\u00a0  <\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"\"><tbody><tr><td>\n  <strong>ATSF\n  Setting<\/strong>\n  <\/td><td>\n  <strong>Bit\n  Rate for 500kHz Channels<\/strong>\n  <\/td><td>\n  <strong>Duration\n  for 20 Data Bytes<\/strong>\n  <\/td><td>\n  <strong>Dur.\n  100 Bytes<\/strong>\n  <\/td><\/tr><tr><td>\n  Typical Packet FEC=0(4\/4) \n  <\/td><td>\n  FEC=1(4\/5)\n  <\/td><td>\n  FEC=4(4\/8)\n  <\/td><td>\n  FEC=1(4\/5)\n  <\/td><\/tr><tr><td>\n  7\n  <\/td><td>\n  21.87 kbps\n  <\/td><td>\n  20mS\n  <\/td><td>\n  25mS\n  <\/td><td>\n  30mS\n  <\/td><td>\n  52mS\n  <\/td><\/tr><tr><td>\n  8\n  <\/td><td>\n  12.50 kbps\n  <\/td><td>\n  44mS\n  <\/td><td>\n  44mS\n  <\/td><td>\n  56mS\n  <\/td><td>\n  92mS\n  <\/td><\/tr><tr><td>\n  9\n  <\/td><td>\n  7.03 kbps\n  <\/td><td>\n  64mS\n  <\/td><td>\n  78mS\n  <\/td><td>\n  100mS\n  <\/td><td>\n  160mS\n  <\/td><\/tr><tr><td>\n  10\n  <\/td><td>\n  3.90 kbps\n  <\/td><td>\n  125mS\n  <\/td><td>\n  144mS\n  <\/td><td>\n  184mS\n  <\/td><td>\n  310mS\n  <\/td><\/tr><tr><td>\n  11\n  <\/td><td>\n  2.14 kbps\n  <\/td><td>\n  240mS\n  <\/td><td>\n  265mS\n  <\/td><td>\n  340mS\n  <\/td><td>\n  580mS\n  <\/td><\/tr><tr><td>\n  12\n  <\/td><td>\n  1.17 kbps\n  <\/td><td>\n  480mS\n  <\/td><td>\n  520mS\n  <\/td><td>\n  680mS<br>\n  (Don\u2019t Use)\n  <\/td><td>\n  1020mS\n  (do not use)\n  <\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p> For packets greater than 10-20 bytes, we recommend not to use Forward Error Correction FEC 4(4\/8) with the Spreading Factor<strong><em> ATSF<\/em><\/strong> of 12, because packets are too long for the system.\u00a0 <\/p>\n\n\n\n<p>The fast efficient over-the-air protocol is ideal for sending data between RTUs and between Master Controllers and RTUs.  This RV-M50 radio modem can send information between two devices 20-50 times per second, and even get responses back in 40mS, so a round-trip inquiry can take place in 80mS out and back.  <\/p>\n","protected":false},"excerpt":{"rendered":"<p>This is information about a communication time test with an oscilloscope to measure and show how fast our long-range LoRa technology works. Below is a picture of the data communication time. The Green pulses were inbound 16 bytes of data on a UART into Radio #1 at 38400bps. The Yellow pulses are the outbound 16 [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":[],"categories":[3,37,5,59],"tags":[],"_links":{"self":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/1292"}],"collection":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/comments?post=1292"}],"version-history":[{"count":1,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/1292\/revisions"}],"predecessor-version":[{"id":1294,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/posts\/1292\/revisions\/1294"}],"wp:attachment":[{"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/media?parent=1292"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/categories?post=1292"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.raveon.com\/data_radio_info\/wp-json\/wp\/v2\/tags?post=1292"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}